H300 & 302 Rising Butt Hinges

Specifications

These hinges cause the door to SHUT

Rising butt hinge
H300 has a 13.6mm rise over 180 degrees
H302 has a 10.5mm rise over 180 degrees
100×77×3mm rising butt hinge
These hinges cause the door to SHUT
Maximum adjusted door weight 60kg as standard or up to 80kg (please contact the sales office for advice)
Minimum door thickness 29mm
c/w metric 5 × 32mm wood screws
To ensure correct working, pairs of rising butts must be fitted co-axially with screws supplied.
Special door head/frame details may be required to allow the door to rise
Due to the precision engineering of our rising butt hinges, 3 or even 4 can be used per door leaf, if required
Unless otherwise stated stainless steel substrate, Grade 316 stainless steel available

Notes:
These butt hinges are not to be confused with the HI‑LOAD range, in that they require regular maintenance. After fitting, the cam faces and pin must be lubricated with grease supplied, following the manufacturer’s instructions. Radius corner R5 on LR/RR versions.
H302 generally is intended for heavier doors as the reduced cam height slows the closing action. As uncontrolled items however customers are advised to test closing speeds etc for specific door type and installation.