Technical PDF (160k)

H300

THESE HINGES CAUSE THE DOOR TO SHUT. DOOR RISES 16MM OVER 180 DEGREES

100x77x3mm rising butt hinge

Stainless steel 304

To ensure correct working, pairs of rising butts must be fitted co-axially with screws supplied

Two butts per door as standard should be used. Three or even four may be used in some circumstances, please contact the sales office for advice

c/w M5 x 30mm screws

Maximum adjusted door weight 60kg

Minimum door thickness 29mm

Unit weight 0.36kg

Packing box quantity 2 or 30

Note: The RR and LR versions have an R5 corner radius for easier fitting

Note: These butts are not to be confused with the RT HI-LOAD range in that they require regular maintenance. After fitting the cam faces and pin must be lubricated with grease supplied, following the manufacturers instructions.